Bluetooth Low Energy with Android



Ever wanted an oven that would warn you if it was still on when you left the house? What about underwear that tells you when it needs washing? Are you making model rockets and you want to control them with your phone?   Maybe you just want to add another *thing* to the Internet, or learn the process of making electronics from scratch, soup to nuts.

After coming to our workshop, you'll have the hardware and the know-how to make it happen.

When you come to this workshop, you will learn about BLE and you will get to make your very own custom BLE hardware device using Surface Mount Technology. 

The device will be a custom PCB, etched on site with a pre certified antenna module, so you wont need FCC approval on the radio.  The custom PCB will be designed by you, not us, but it can be forked from one of our open source reference designs.   We're going to not only provide you with the basics, we'll also have other parts on hand as well, so you can make more than just a simple beacon.

The workshop will cover:

  • An overview of Bluetooth Low Energy. What it is, how it works.
  • BLE Modules and how to use them in your schematic. 
  • Creating a schematic and PCB layout.
  • Rapid prototyping of PCB and SMT assembly
  • Basic BLE operations in Android.

The workshop will be in two 3 hour sections. The three hours will cover BLE and hardware. At the end of it you'll have a schematic and layout for a BLE module based board that suits your custom application.  After a one hour break, the last half of the workshop will cover circuit assembly and programming.